| Product Code
| #901 |
| Product Name
|
Flower Patching Paste #901 |
| Introduction |
| Recommended Uses | For patching and filling of minor cracks, holes and irregularities of interior masonry, plaster and wood. |
| Description | This is a water-based patching paste with excellent filling property. It is supplied in semipaste
form so can be handled easily.
- superfine texture
- high solid content
- high adhesive strength
- more water resistance than other patching pastes
- suitable for filling of open grained woods
- ready for use |
| Technical Data |
| Vehicle | acrylic copolymer |
| Colour | off white |
| Finish | matt |
| Volume Solids | approx. 53% |
| Dry Film Thickness | 2 Microns |
| Calculated Coverage* | 2 Metre² / Litre / 1 coat(s) |
| Drying Time | Touch Dry 1 hour |
| | Hard Dry 4 hours |
| | Recoating (Min) 6 hours |
| | Recoating (Max) indefinite |
| overcoating - minimum : 24 hours |
| overcoating - maximum : indefinite |
| * Based on theoretical consumption; factors such as paint colour, application methods, surrounding environment and substrate conditions will affect the actual consumption. |
| Standard Packing |
| 1 - kg tin |
| 4 - kg tin |
| 25 - kg tin |
| |
| |
| Surface Preparation |
| Surface Preparation | MASONRY SURFACES
- All surfaces must be dry and free from grease, dirt, loose mortar, efflorescence and contaminants.
- New concrete should be allowed to age for at least four weeks under normal drying conditions before applying the patching paste. |
| Combination |
| TOPCOAT | |
| |
MASONRY SURFACES / WOOD SURFACES
- All types of emulsion paint, wood coating and solvent-based coatings.
|
| |
|
| Application |
| Method of application | putty-knife or trowel |
| Reducation Ratio | not necessary (ready for use). Adjust with small amount of water if required. |
| Cleaning Solvent | water |
| |
| Other Consideration | - Stir well before use.
- Close lid tightly after use.
- Ensure basecoat is thoroughly dry before topcoating.
- Do not store at 0°C or below.
- Do not apply at 8°C or below.
- Store in a cool, dry place. |
| Precautions | - Provide adequate ventilation during paint application.
- If the product comes in contact with the skin, wash thoroughly with luke warm water and soap or suitable cleaner.
- If the eyes are contaminated, flush with water for minimum 10 minutes or diluted boric acid solution and obtain medical attention at once.
- Keep out of reach of children. |
| |
| |
| |
| Download Attachment |
| Attachment |  Specification (PDF)
|
| Other Information |
| Category | Putties |
| |
| |
| |
